Desk Organizer Basket by SaVo3D

SaVo3D

Tools>Organizers

Print Profile(3)

All

P1P

P1S

X1 Carbon

X1E

Version 1 with 5 compartments

Designer

4.4 h

2 plates

4.8(4)

Version 2 with 7 compartments

Designer

4.9 h

2 plates

5.0(1)

thicker handle and wall

Designer

5 h

2 plates

Open in Bambu Studio

Boost

Released

Description

This is my desk organizer with dividers!

There are two versions. One with 5 possible compartments and one with 7 possible compartments.

You decide how many dividers you need to store your pens and utensils. Simply slide the dividers into the slots, no glue needed!

Easy to print!

Print instructions:

set support structure to “normal auto” and the style to “snug”
layer height 0,20mm
2 wall loops
top/bottom shells 4 layers
top/bottom shell thickness 0,80mm
sparse infill 10%
sparse infill pattern “gyroid”

Before printing, make sure your build plate is clean and apply some adhesive. Wash the build plate with oil free soap and wipe it off with some paper towels. For build plate adhesion, apply a thin, even coat of your preferred adhesiv. I repeat the process every 5-6 prints.

Version 1 with 5 possible compartments:

Version 2 with 7 possible compartments:

Check out my other models and dont forget to give me a like if you were satisfied. Thank you in advance!

Comment & Rating (13)

@gina_208298963

Print Profile

Version 2 with 7 compartments

works beautifully 😃

(Edited)

The designer has replied

@SaVo3D

thank you kindly Gina!

@Tpjacobsen

fits my medes Well

The designer has replied

@SaVo3D

Thank you kindly! Looks great with your filament. Would you mind to rate the model and give me a like if you were happy and satisfied with it? Thanks in advance.

@user_891865984

Print Profile

Version 1 with 5 compartments

Nice design, but top handle brakes quite easy

(Edited)

The designer has replied

@SaVo3D

You are the first to report this issue... it depends what filament you use, some are more brittle than others, you know that for sure. What can i do for you? Would it help you if i made a model with thicker walls? But be aware that the print time will increase!

@SaVo3D

I have taken care of your problem! I uploaded a print profile with thicker handle and increased the inner wall thickness. I hope that solves the issue and you can rethink your rating :-)