A modular organizer with tray caddy offers an elegant, easy-to-print solution to your desk tidiness woes!

• Simple design reduces waste – print and swap blocks when you need more storage
• Modular components set in place using the “+” symbols as a guide
• Blocks use 2.4mm walls to facilitate faster printing with good durability
• Hundreds of combinations with 5 tray sizes and 20+ modular blocks

Tolerances

• 0.2mm between blocks
• 0.4mm on bottom surfaces that require bridging

Printing Recommendations

Optimized for 0.2mm layer height. Please be aware that extreme warping on tray pieces will cause fit issues.

If not using the included profile or 3MF, recommend the following settings:

• Strength > Bridge direction = 45°
• Speed > Overhang speed > "25, 50%" = 30mm/s

Includes:

• 5 tray sizes: 2x2, 3x2, 3x4, 4x2, 4x3
• 1x1 blocks
  • 1x1 short
  • 1x1 short stackable
  • 1x1 medium
  • 1x1 tall
• 2x1 blocks
  • 2x1 short
  • 2x1 medium
  • 2x1 tall
  • 2x1 tall (½ divider)
  • 2x1 tall (⅓ divider)
• 2x2 blocks
  • 2x2 short
  • 2x2 medium
  • 2x2 medium tiered (w/ insert)
  • 2x2 phone stand (+ w/cable slot)
• 3x1 blocks
  • 3x1 pen/pencil tray (18mm tall)
  • 3x1 phone stand (28mm tall)
  • 3x1 short
  • 3x1 medium
  • 3x1 tall
  • 3x1 tall w/hex pattern
  • 3x1 tall no sides
• 4x1 blocks
  • 4x1 short
  • 4x1 short w/dividers
  • 4x1 medium
  • 4x1 notebook storage

Please send me a note with any suggestions or if you experience issues with printing any models.

Thanks! :)