Print Profile(1)
Bill of Materials
- M3x30 self-tapping screw x 2:
Description
----2025.7.17 Slightly expand the slide groove of the base to prevent the PLA printed FlameReaper from being too tight when placed in.
----
This is the Warcraft-themed wall mount for FlameReaper, but it functions well as a regular coat rack if you don't have the warglaive.
- Same as the warglaive, not compatible with A1mini.
- The 3 wall mounts released at the same time ( Wall Mount of Frostmourne, Wall Mount of FlameReaper, Wall Mount of Shalamayne ) have exactly the same holes spacing.
About Print Profile:
- All parts are pre-supported and ready to print.
- Considering the durability, it is recommended to print all in PETG, all models in the video are PETG.
About Assembly：
- For detailed installation steps, please refer to the attached Assembly Guide.
- Installation requires 2 self-tapping M3x30 screws for wall mounting.
- You can install the KA001 LED Kit in this mount to create wall lighting.
About Color：
- The base is champagne gold.
- The horns are dark brown.
- The rune is transparent green or clear transparent.
- The reference colors have been preset in the profile.
Membership
Once you obtain a commercial license, you can sell printed copies of my work.
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (34)