The center hole is 8mm in diameter,
the clock mechanism you can find on Amazon or AliExpress, Temu,..
If you like my work, i'm open for donations via Paypal. It is much appreciated.
https://www.paypal.com/donate/?hosted_button_id=3KZUPFUG4KLUL
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.8
PLA BambuLab Matte Dark Matte Dark Red Transmission Distance: 1.6
PLA BambuLab Basic Yellow Transmission Distance: 4
PLA BambuLab Matte Desert Tan Transmission Distance: 2.4
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Matte Dark Matte Dark Red
At layer #21 (1.76mm) swap to Yellow
At layer #26 (2.16mm) swap to Matte Desert Tan for the rest.