This minimalistic egg tray holds 15 eggs, and only uses 80g of filament and prints in 1.5 hours.
Dimensions: 244mm x 146mm x 15mm
Stacks eggs tightly, but will still accommodate XL eggs. Because the height is minimal, this is great for using on shelves with a minimal gap.
There is a slight overlap between the brim and the back-right prime line, using the default printer profile. Makerworld won't allow custom machine profiles, but if you want to avoid this overlap, replace the last 10 lines of your “Machine Start G-Code” with these:
(This is verified working on X1C only)
G1 X131.0 Y254 Z0.2 F24000.0;Move to start position
G1 E{retraction_length[initial_no_support_extruder]} F1800
M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}
G0 X249 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}
G2 X256 Y247 I0 J-7 E.562
G0 Y125 E6.4
G0 X255.5
G0 Y247 E6.4
G3 X249 Y253.5 I-6.5 J0 E.562
G0 X131 E6.4