Sailor_Moon - Free 3D Print Model

Search models, users, collections, and posts

FantasyZ

Art>2D Art

IP Report

Print Profile(1)

All

P1S

X1 Carbon

H2D

P1P

X1E

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.08mm layer, 1 walls, 100% infill

Designer

4.9 h

1 plate

5.0(5)

Open in Bambu Studio

Boost

174

Released

Description

If you like my models, please comment, share your prints, or you can purchase filaments through my links. Every bit of support keeps me motivated to make more awesome stuff. Thanks a lot!

Demon Slayer series: Demon Slayer Hueforge | Collection - MakerWorld: Download Free 3D Models

One Piece series: OnePiece_Hueforge | Collection - MakerWorld: Download Free 3D Models

Pokemon series: https://makerworld.com/en/collections/22946087-pokemon-hueforge

Dan Da Dan series: https://makerworld.com/en/collections/7165703-dandadan_hueforge

Marvel series: Marvel_Hueforge | Collection - MakerWorld: Download Free 3D Models

Animal series: Animal_Hueforge | Collection - MakerWorld: Download Free 3D Models

Print Instruction:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 137x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.4mm and the Actual Depth is 2.5mm

Filaments Used:
    PLA Black Transmission Distance: 0.2
    PLA Blue Transmission Distance: 3.1
    PLA Orange Transmission Distance: 6
    PLA Red Transmission Distance: 6.6
    PLA White Transmission Distance: 6.2
    PLA Yellow Transmission Distance: 6
    PLA Cyan Transmission Distance: 0.1
This print uses 7 unique filaments

Swap Instructions:
    Start with Black (Slot1)
    At layer #6 (0.56mm) swap to Blue (Slot2)
    At layer #9 (0.8mm) swap to Orange (Slot3)
    At layer #11 (0.96mm) swap to Red (Slot4)
    At layer #15 (1.28mm) swap to White (Slot1)
    At layer #18 (1.52mm) swap to Yellow (Slot2)
    At layer #22 (1.84mm) swap to Cyan (Slot3)
    At layer #23 (1.92mm) swap to White (Slot1) for the rest.

For only ONE AMS:

Start with 4 colors as follows:

Slot1: Black

Slot2: Blue

Slot3: Orange

Slot4: Red

Pause is set at Layer 14 in the print file to allow color swap:
Slot1: Black --> White
Slot2: Blue --> Yellow
Slot3: Orange --> Cyan

******************************************************************************************

Boost Me (for free)

Not just 3D prints—each piece is a layered illusion of color, depth, and passion. Thanks for your visits, any feedback will be appreciated!

******************************************************************************************

japanese