A nice GTA lamp to enhance your gaming sessions. Print the frame and front logo cut out in black and the diffuser and back cover in white for best performance. Glue the front diffuser to the frame and the logo front on top of the diffuser with CA glue. Attach some led strip to the back cover and install the back cover with small screws so you can open it again if ever needed. I used PLA/PETG filament for the parts.

The front cut out logo is mirrored so it's laying face down when printed to get a good looking texture on it (from the PEI plate).

Everything can be printed without supports. 

The lamp in the pictures has a few pieces of warm white (2700K) led strips glued to the inside of the back cover and the strips are soldered together at the ends.