A Hueforge painting of my dog sitting in a sunflower field using Bambulab basic PLAs.

0.4mm nozzle

0.04mm HueForge recommended settings (search youtube for video guides)

Arachne

Top surface at 150mm/s

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Green Transmission Distance: 2
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Basic Yellow Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Green
At layer #11 (0.96mm) swap to Brown
At layer #15 (1.28mm) swap to Yellow for the rest.