Simple modular organiser to keep your cables tidy. Can be customised to hold any number of cables just by adding more dock pieces.
Mounts come in two sizes (small = 3.2 mm, big = 5.5 mm) to suit a variety of cables. The larger size is easier to assemble and will still hold any cable however.
- Dock pieces - 1x left + 1x right + as many center pieces as you need
- Cable mount - 1x bottom piece + 1x top piece
- Magnets - 4x magnets (6 x 3 mm) per cable
- Super glue - to stick the magnets in place
- Double-sided tape - to stick the dock down
- The dock pieces are intentionally designed with tight tolerances to keep them together. They should snap together with a satisfying click
- The magnet holes are not designed to be press fit, but this may work depending on your print tolerance
- Double check your magnet polarity before you stick them down! If you get this wrong, you can use a small flat head screwdriver in the slopes adjacent to the magnet holes to pry them back out
- Feel free to request designs for different magnet sizes or cable thicknesses. I used 6 x 3 mm magnets because I had plenty of spares from other projects