Bambulab P1/X1 nozzle wiper

Remixed by

Bambulab P1/X1 nozzle wiper

Remixed by
Boost
97
226
54

Print Profile(2)

All
P1P
P1S
X1
X1 Carbon
X1E
A1
A1 mini

Mainly for P1P/S
Mainly for P1P/S
Designer
2 h
1 plate
4.8(20)

Mainly for X1C
Mainly for X1C
Designer
1.9 h
1 plate
4.9(7)

Open in Bambu Studio
Boost
97
226
54
29
344
176
Released

Description

I modified the form for the possibility of screwing together with an M3 screw. I used TFC Silicone Rubber Type 3 HB Heat Resistant silicone and it works perfectly, PETG no longer leaves any debris on the nozzle. I used 1.89 grams per mold, which is 1.7 milliliters. Mold and holder is printed from PETG with PLA as support material. There is a small stop in the mold and in the wiper holder, which prevents the silicone wiper from sliding out towards the purge chute.

EDIT 03.05.2024
New bracket for X1C using the screw from the original cleaner. Use the print file for the X1C, there is a bracket with integrated supports, then remove them. Insert the screw into the hole (as in the photo), then screw the holder into the poop chute with the help of an Allen key and then insert the silicone cleaner. If it's difficult, use a little oil.

You can also look at my other accessories for BambuLab printers.
Silicone nozzle wiper A1/A1 mini
Mount A1 mini PTFE Tube Connector
Ultralight honeycomb/full hotend cover A1 series
Ultralight honeycomb/full poop deflector A1 series
A1 mini PTFE coupling PC4 M10
Z axis dust cover TPU (P1/X1 series)
Ultrathin handle cover P1/X1 series (0.2 nozzle)
Bambulab silicone sock hotend P1/X1 series
AMS feeder PTFE adapter TPU
PinSpool holder v3 for Honeycomb riser
LED light riser P1/X1
 

Boost Me (for free)

If you like the model, I will be happy if you support me in my work with a boost. Thank you.

Bill of Materials

Maker’s Supply Kits and Parts
Buy Now
Download BOM

Comment & Rating (54)

Please fill in your opinion
(0/5000)

Boosted
Hey, verkauft mir einer die Silikon-Wiper? 6 Stück wären klasse.
The designer has replied
1
Reply
@Joe.Punkt Hi Joe, where are you from?
(Edited)
0
Reply
Hast du welche bekommen würde auch gerne 2-3 haben
0
Reply
Replying to @BastiBasti :
Hi @BastiBasti , I texted @Joe.Punkt but he didn't reply. Despite the fact that I don't have so much time now, because our daughter was born, my offer is still up to date.
0
Reply
Ja habe denn Silikon Halter der nun nicht mehr verschraubt werden muss siehe andere Seiten im WWW in PA6-CF Filament ausgedruckt weil PETG zu weich wird und die Form habe ich in PLA Meta ausgedruckt wegen dem support der löst sich so super ja und als Silikon habe ich TFC Silikon Kautschuk Typ 3 genommen weil er bis 450 grad hitzebeständig ist. https://www.youtube.com/watch?v=vnyduS2s1AE Yes, I have a silicone holder that no longer needs to be screwed on, see other pages on the web, printed out in PA6-CF filament because PETG becomes too soft and I printed the shape in PLA Meta because of the support, it comes off so well, yes and as silicone I have TFC Type 3 silicone rubber is used because it is heat-resistant up to 450 degrees. https://www.youtube.com/watch?v=vnyduS2s1AE
0
Reply
Kannst du die Daten mal noch hochladen wo man die Teile herunterladen könnte? Begreife noch nicht, warum der nicht geschraubt wird :-)
0
Reply
Great remix. I used Smooth-On Smooth-Sil 945, which is 45 Shore A. And printed the holder in PolyLite ABS. Both came out great, and do a better job at wiping than the stock wiper.
(Edited)
1
Reply
Boosted
Print Profile
Mainly for P1P/S
Mold came out good, I would say a few things to change would be reference points so the mold goes together one way and the inlet and vent extended so shrinkage is accounted for. I haven't used it yet, hoping that 30A shore will be strong enough. I can't find that red stuff or anything stronger that isn't a fortune on Amazon.
0
Reply
Is printing the wiper in TPU a good alternatif?
The designer has replied
0
Reply
I haven't tried it, so I can't say if it will work. It depends on what temperature the TPU can withstand.
0
Reply
Replying to @geo.luki :
I see the point. As the TPU is printed like the same temp as what the nozlle will have when cleaning.
0
Reply
Where can I get this 20 shore silicone?
The designer has replied
0
Reply
Amazon carries Smooth-On Dragon Skin 20. Easy 2-part platinum cure silicone. Thoroughly mix, then place into a syringe with a standard Luer slip tip and inject into the mold.
(Edited)
0
Reply
For example on Alexpress, Amazon, or on your local e-shops. https://www.amazon.com/TECHAROOZ-Liquid-Silicone-Making-Platinum/dp/B09TJXW4X5?th=1
0
Reply
Thank you to @friewald.joos for the award and the boost donation.
1
Reply
Boosted
Very great tool :)
1
Reply
Print Profile
Mainly for P1P/S
funktioniert
1
Reply
Print Profile
Mainly for P1P/S
merci
1
Reply