Nice print. It is a little loose, but I could not make it fall out. Will scale up if needed. Otherwise, very nice piece. 

mcdoubill

0.2mm layer, 2 walls, 15% infill

Micky

oOKNOBIOo

Perfect print and print profile the cover snapped on and now no need to worry about stuff get into the big fan. Going to print another one for my second aux fan that I installed

Katie.TheJasperHouse

hallo. no is not . this is just a fan cover , they look all not really different. my looks like others , your also . 

Landvoigt

fscottcopeland

This appears to be a remix of my fan cover. Please attribute it appropriately. Thank you.

this is for sound dampening, the other side is also full with this . 

befor the silent software  upgrade this printer was really loud.

and was was a little held for some noise.

What's up with the foam in the picture? My first guess would be sound dampening, but there's definitely not enough coverage there for that..

rpinerd

Druck war okay. Aber ich fand das Teil etwas zu klein, muss man etwas skalieren damit es klemmt

svendominik

bei mir passte das super . Ich werde mir das nochmal angucken , 

J3DPrintopia

Fits perfectly. Would recommend printing in either ASA, ABS or PETG as the heat resistance of PLA is too low and can cause the print to warp over time and fall off.

Roshamb0

nello

cover

BambuLab_9e8d0c16-25f7-4954-a901-71238ec182a6.webp

plate_1.png

plate_1.webp

<ul><li>Changed the amount the acceleration from 10K to 20K just to allow for faster printing</li><li>Included my PLA profile that I have been using for a while now with perfect prints 90% of the time.</li></ul>

<p>Fancover saves the fan from small parts. </p>

Print Profile(2)

Description

Comment & Rating (47)

License

Related Models

Stylish Fan Cover for A1 and A1 Mini 3D Printers

A1/A1 mini Fan Cover Retro Air Filter Shape

P1S/P1P/X1C Fan Cover Voronoi

Sink Drain Cover - with Handle

X1 P1P P1S Fan cover