Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Black Transmission Distance: 0.6
PLA Red Transmission Distance: 5
PLA Yellow Transmission Distance: 6
PLA White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Red
At layer #10 (0.88mm) swap to Yellow
At layer #17 (1.44mm) swap to Jade White for the rest.

Frame for the picture:

https://makerworld.com/en/models/209367#profileId-229295