Print Profile(1)
Description
If you like my models, please comment, share your prints, or you can purchase filaments through my links. Every bit of support keeps me motivated to make more awesome stuff. Thanks a lot!
Demon Slayer series: Demon Slayer Hueforge | Collection - MakerWorld: Download Free 3D Models
One Piece series: OnePiece_Hueforge | Collection - MakerWorld: Download Free 3D Models
Pokemon series: https://makerworld.com/en/collections/22946087-pokemon-hueforge
Dan Da Dan series: https://makerworld.com/en/collections/7165703-dandadan_hueforge
Marvel series: Marvel_Hueforge | Collection - MakerWorld: Download Free 3D Models
Animal series: Animal_Hueforge | Collection - MakerWorld: Download Free 3D Models
Print Instruction:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 224x168mmm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.8mm and the Actual Depth is 1.8mm
Filaments Used:
PLA Black Transmission Distance: 0.2
PLA Red Transmission Distance: 6.6
PLA Yellow Transmission Distance: 6
PLA White Transmission Distance: 5.9
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #12 (1.04mm) swap to Yellow
At layer #14 (1.2mm) swap to White for the rest.
******************************************************************************************
Boost Me (for free)
Not just 3D prints—each piece is a layered illusion of color, depth, and passion. Thanks for your visits, any feedback will be appreciated!
******************************************************************************************
License
Comment & Rating (1)