AMS riser - flat version V2 by PecaM6

PecaM6

3D Printer>3D Printer Accessories

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

0.2mm layer, 3 walls, 20% infill

Designer

20.8 h

5 plates

4.8(4)

0.2mm layer, 3 walls, 15% infill

Designer

1 h

1 plate

0.2mm layer, 3 walls, 15% infill

Designer

1.1 h

1 plate

0.2mm layer, 3 walls, 15% infill

Designer

32 min

1 plate

Boost

Released

Description

Flat version of AMS riser. Glass holder STEP file is included. Print from PLA, but if you mostly print high temperature materials i recommend printing from ABS. I connected the parts using steel pins (6x30), but I included pins for print.

If you want or need, you can print a reinforcement between both sides. I use one reinforcement in place of the seam, but it isn´t necessary.

V2 - ABS:

Added radius on hexagon holes for improved stability during printing overhangs.

Added connenting cross for connecting parts.

If you have problems with the tightness of the glass, print the washers between the parts.

Comment & Rating (23)

@print3dReality2

this printed very well using ASA. didn’t have abs laying around but I had some elegoo ASA that is $16 usd/roll from Amazon. printed excellent. added cob led lights from Amazon as well. my only gripe is the glass sits more on top of the opening vs sitting inside the opening. maybe my tolerance is too tight. but none of the Bambu glass fits flush. so I had to add some foam tape to the glass.

The designer has replied

@PecaM6

I had the same problem with glass tightness when printing from ABS. I solved it with the orange washers between the parts. I will upload models for download.

@PecaM6

Now you can download washers and long connecting cross.

@user_2133785543

please share link or provide help on how to access the support hex and cross bar

@Custom3D.ZA

Print Profile

0.2mm layer, 3 walls, 20% infill

I used some very old PETG that has been semi dried that ended up not giving the best results but the profile itself is perfect. Will probably print a new one with abs in the near future

The designer has replied

@PecaM6

Nice work. I hope you will be satisfied.

@user_2133785543

link not working https://makerworld.com/en/ models/131595#profileld-142730

The designer has replied

@PecaM6

It works fine for me...

(Edited)

@Serenity47

Print Profile

0.2mm layer, 3 walls, 20% infill

The new butterfly biscuits are great. printed in PETG.

@DRAGON_69_GER

Boosted

how much higher is that?

The designer has replied

@PecaM6

I don't understand your question. What should be higher? Both versions have the same height.

@DRAGON_69_GER

Boosted

Replying to @PecaM6 :

Yes, but how high are the two versions? It is not in the description

@PecaM6

Replying to @DRAGON_69_GER :

The height between the printer and AMS is 73mm.

@Calzune

You have 3 versions of this modell... Which one is the latest and up to date?

The designer has replied

@PecaM6

I have two versions. V1 is PLA version which is susceptible to heat from printing industrial filaments. So i remix it to version V2 customized for ABS print. So both V2 versions are up to date.

(Edited)