72 x 72 x 100 mm (100% scale)
A stylish pen holder, which will bring life to any desk.
You can choose from two versions: a standard version, and a thick version, which has a bigger shell thickness for improved rigidity. The standard version is faster to print, and consumes less material, however at the expense of thinner walls, which deform easier.
It is possible to print the pen holder in vase mode, but it's not recommended, as the walls would be too thin, and the print would very likely break.
PLA
0,2 mm
or
>0,2 mm + variable layer height
0%
None. The model was designed not to require any support material.
The model can be up or downscaled, according to your needs. However be careful with downscaling, wall thickness shouldn't be smaller than 2 perimeters. If you plan to downscale the model, download the thick version.
Default, laid flat on the bottom
Not necessary, contect area is sufficiently big, and you shouldn't face any issues with adhesion.
In this section, you can find a list of all updates and fixes, which were introduced to the model along the way. Each update will be explained thoroughly, so that you know, which issue was every specific update adressing. If you're having any problems with the model, you can check here, if a new, revised version of the model, has already been released in a response to your problem, or not.
If you run into any issues with the model, please pay a visit to a section of known issues, which can be found just below the Updates and fixes. If you won't find your specific problem in there, don't hesitate to contact me via dm.
There currently aren't any known issues/work in progress. If you run into any, please contact me via dm.
My work is free for personal, non commercial use. If you want to sell, or monetize my models in other way, please contact me via dm, and we will discuss details, terms and conditions, and your individual pricing plan.