170 x 83,88 x 53,43 mm (100% scale)
Have you ever wanted to hold a Great white shark, or keep it as your pet? Here's a good alternative.
This shark is divided into 7 articulated segments with 2 movable fins, which grant the model with lifelike feel, and movement. It's quick and easy to print, and doesn't require any supports.
I've included one file in the .stl format.
PLA
0,2 mm
>10%
None. The model was designed not to require any support material.
Possible, downscaling is easier, than ever before! If you have a well calibrated machine, you can downscale the model without any need for concerns. If you won't go way too crazy with downscaling, you shouldn't run into any issues.
Default, laid flat on the belly
Not necessary, contact area with the buildplate should be sufficient. If your print surface suffers from poor adhesion, consider using an adhesive spray, or an other kind of adhesion booster. Using a brim is possible, but not recommended, as it would be difficult, and inconvenient to remove afterwards.
In this section, you can find a list of all updates and fixes, which were introduced to the model along the way. Each update will be explained thoroughly, so that you know, which issue was every specific update adressing. If you're having any problems with the model, you can check here, if a new, revised version of the model, has already been released in a response to your problem, or not.
If you run into any issues with the model, please pay a visit to a section of known issues, which can be found just below the Updates and fixes. If you won't find your specific problem in there, don't hesitate to contact me via dm!
There currently aren't any known issues/work in progress. If you run into any, please contact me via dm.
My work is free for personal, non commercial use. If you want to sell, or monetize my models in any other way, please visit my Patreon for more licensing options.
Comment & Rating (1011)