Bambu Lab Spare Box w/Magnets

Remixed by

Bambu Lab Spare Box w/Magnets

Remixed by
Boost
9
19
1

Print Profile(1)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

0.28mm layer, 2 walls, 15% infill
0.28mm layer, 2 walls, 15% infill
Designer
4.8 h
2 plates
5.0(1)

Boost
9
19
1
0
14
19
Released

Description

I like the storage size and options this spare box provided but the downside was how the lid connected. The clip holding the lid to the base were a super pain to get on. Originally I wanted to go with a hinge, but then I remembered I had a bunch of left over 20 x 5 x 2mm magnets from building Pursa Enclosures in the past and it was much less work. Basically I removed the studs for the clips and cut out material for the squares to press in to. I had to increase the thickness of the lid by 1mm as well so there was enough depth for the magnets, but I bumped it up to .28 layer height so it prints faster anyway.

 

**UPDATE SINCE COVER PHOTO - I decided to make cut outs in the base next to the nozzle wire channels to add more storage space since it seemed a shame to waste it

 

The actual size of the magnet cut out holes are 19.7 x 4.9 x 2mm, because that was closer to the actual measurement of mine and I wanted a closer press fit, tho super glue will be used regardless. THESE ARE THE ONES I USED

 

Now using the lid is super easy and is held in place by the magnets.

Comment & Rating (1)

Please fill in your opinion
(0/5000)

Print Profile
0.28mm layer, 2 walls, 15% infill
1
Reply
No more