Gravitrax Junior Raiser/Elevation Stones (Erhöhungen) different versions
Copyright Claim
Gravitrax Junior Raiser/Elevation Stones (Erhöhungen) different versions
Boost
6
15
5
Print Profile(8)
1 connector/bridge 3x - 100.5% - 0.2mm layer, 2 walls, 15% infill
Designer
53 min
1 plate
1 piece - 100.5% - 0.2mm layer, 2 walls, 15% infill
Designer
23 min
1 plate
6 pieces x5 - 100.5% - 0.2mm layer, 2 walls, 15% infill
Designer
6 h
1 plate
1 piece x5 - 100.5% - 0.2mm layer, 2 walls, 15% infill
Designer
1.1 h
1 plate
Click to see more
Open in Bambu Studio
Boost
6
15
5
3
32
23
Released
Description
Gravitrax Junior Raiser/Elevation Stone (Erhöhung)
For a thight fit at the top use 100%, for a biased fit top/bottom use 100,5% X/Y (Z 100%) and a thight fit at the bottom use 101% X/Y (Z 100%).
The uploaded profiles are in the biased version(100,5%).
I prefer to print without support, depending on the material the inside overhanging corners can have minor optical defects, please check the photos.
Comment & Rating (5)
All
Boosted
Print Profile
1 connector/bridge 3x - 100.5% - 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
1 piece - 100.5% - 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
6 pieces x5 - 100.5% - 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
1 piece - 100.5% - 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
1 connector/bridge 3x - 100.5% - 0.2mm layer, 2 walls, 15% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld