PygmyTwylyte

cover

20240107_091553_2423ad76-c20f-4779-b3a1-29a323cf0126.jpg

20240107_091628_e6c4201c-b891-4616-8798-1f030a091535.jpg

20240107_091528_b7b17726-b5f1-4694-b41a-29e1140da0a6.webp

20240107_091628_a859c599-fc2d-442a-836b-3f186fce0dbc.webp

20240107_091553_54c44bf1-ef09-4c7f-b87b-77b421c32596.webp

plate_1.png

I used:<ul><li>0.2 mm layers</li><li>Overture Red PLA Pro / Bambu Ivory PLA Matte</li><li>Tree supports – only needed for the ring at the top of the stem</li><li>Bambu PLA Support W for the support interface (might be hard to detach the support from the ring without breaking if using the same material as the model, but could probably get away with it. PETG would work well for the interface too.)</li><li>Due to the rounding I did on the base, your slicer may want to place tiny supports all around the periphery. I left mine in but you could get around it with a support blocker or just by slicing off the bottom few layers of the model. </li></ul>

0.2mm layer, 2 walls, 20% infill, colorized (AMS)

This is a stand for my “I Love Derry” balloon model here: <a target="_blank" href="https://makerworld.com/en/models/127423" rel="nofollow noopener">https://makerworld.com/en/models/127423</a>&nbsp;It's a little bendy at the stem. Holds the balloon up fine as you can see in the photo. You could scale the whole thing up a little to add some strength, but I wanted to keep the stem relatively thin so it would look somewhat string-like.

Stand for Derry Balloon (IT, You'll Float Too!)

Global

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models

hot air balloon earring

Balloon dog² (Squared / Geometrical)

WATER GRENADE

Foot Pump for Inflatables