SpiderMan Venom Symbiote - HueForge by Squish3D

Squish3D

Generative 3D Model>Hueforge & Lithophane

Print Profile(3)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

0.08mm layer, 2 walls, 100% infill

Designer

5.9 h

1 plate

5.0(73)

A1Mini Scaled - 0.08mm layer, 2 walls, 100% infill

Designer

3.6 h

1 plate

4.6(8)

Very thin 150x150 version - 0.08mm layer, 2 walls, 100% infill

2.4 h

1 plate

5.0(2)

Boost

437

666

131

1.1 k

397

Released

Description

Do NOT adjust the thickness (Z) in your slicer!! The layers will not come out right. You CAN adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.

These were my settings and colors for my print that you see in the picture. Your results may vary depending on the filament you use and if you have your own HueForge profile saved with different settings.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Nozzle: 0.4

Filaments Used:
PLA Sunlu Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA PolyLite Aqua Blue Transmission Distance: 2.5
PLA Sunlu White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #25 (2.08mm) swap to Blue Gray
At layer #31 (2.56mm) swap to Aqua Blue
At layer #32 (2.64mm) swap to White for the rest

Comment & Rating (131)

@Choik3D

Love it. Sunlu PLA Meta black, Bambu Blue Gray, Polyterra Brilliant Blue, Sunlu PLA Meta white.

The designer has replied

@squish3D

Looks great! 👍🏻

@BTaylor3D

Print Profile

0.08mm layer, 2 walls, 100% infill

Swapped the white slot for a glow in the dark. 👌🏿

The designer has replied

@squish3D

That’s awesome!

(Edited)

@HotFix

I'm totally trying that next.

(Edited)

@rjbaran

I don't know if anyone else is doing this, but I'm dedicating an entire wall to these Hueforge prints. I am nowhere near done. lol

The designer has replied

@squish3D

This is awesome! I’m happy to be a part of the wall!

@jo3dimensions

awesome print! tried using the Bambu blue glow for the aqua and it sort of worked out. keep these coming!

The designer has replied

@squish3D

Thank you and thank you for sharing! The blue glow looks pretty cool…I should order some and try it on other designs. 🤔

@jo3dimensions

yeah it's pretty nice, it's tinted blue when not glowing unlike other glow filaments ive used so its a nice substitute for lighter blues

@otavio.rinaldi

Espetacular!!!

The designer has replied

@squish3D

That looks great! Thanks for sharing!

@otavio.rinaldi

Very cool!!!

@hzielinski

Print Profile

0.08mm layer, 2 walls, 100% infill

awesome file. didnt have any grey so used blue instead and it turned out great.

The designer has replied

@squish3D

Thank you! And thanks for sharing your print, that turned out pretty cool with the colors you picked!

@hzielinski

also love how thick the base is. wish more were like that.

@sushalucy

Print Profile

0.08mm layer, 2 walls, 100% infill

perfect!

The designer has replied

@squish3D

I love this! Is that just a regular frame? Or did you print a frame and border?

@sushalucy

Replying to @squish3D :

The frames are from the Range, a uk shop. They have a large range of sizes and they are well priced 😀 https://www.therange.co.uk/home-furnishings/picture-frames-and-wall-art/picture-frames/single-frames/winston-black-and-white-frame/?position=14&s=917536#917536

(Edited)

@Saviorlself

amazing

The designer has replied

@squish3D

That looks fantastic! Great job!

@mirkobocca

Print Profile

0.08mm layer, 2 walls, 100% infill

Perfection cannot be described, thank you 🖤

The designer has replied

@squish3D

Thank you! And thank you for sharing, it looks great!

@HotFix

Print Profile

0.08mm layer, 2 walls, 100% infill

I think this print turned out better than the Batman one, and I really liked that. Flashforge black PLA. Overture space gray PLA. Duramic3D light blue PLA. SUNLU white PLA+ My son was little impatient and pulled the print off the bed right after it finished, and it warped as a result. Lesson learned there as I gently heat up the back and use a 36 pack of soda to try and flatten it. :-) Can I request Superman who already has a black and silver outfit for a 4th in the series? That would be amaz!

@HotFix

Following @BTaylor3D's excellent idea, I reprinted this with MICA3D's glow-in-the-dark rainbow filament for the white part and I think it came out great. It is on the left in the picture of two, with the one on the right using normal white SUNLU PLA+. I'm torn on which one I like better. In normal light I think the SUNLY PLA+ white one looks better as the glow-in-the-dark filament isn't nearly as strong a white, but the one on the left glows in the dark which is awesome. I printed both on a holographic PEI Plate for fun, and both curled a bit at the bottom corners (nearest the printer door). The funny thing is the one that curled more I printed at 70c versus the one that curled a little that I printed at 65c. The only thing I can figure is that the hotter one ran overnight night where potentially my printing area got colder as I leave the lid off for PLA prints.

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(3)

Description

Comment & Rating (131)

License

Related Models

Anti-Venom with tenticals

Spiderman modern style hueforge. FAST PRINT

Spiderman Symbiote Suit Hueforge

VENOM hueforge