VENOM hueforge
VENOM hueforge
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.08mm
The Model is 200x112.5mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm
Filaments Used:
PLA+ ESUN Black Transmission Distance: 0.3
PLA+ Sunlu GREY Transmission Distance: 1.2
PLA+ ESUN SILVER Transmission Distance: 3.6
PLA+ ESUNBasic White Transmission Distance: 5
This print uses 4 unique filaments
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with ESUN Black
At layer #10 (0.8mm) swap to Sunlu GREY
At layer #13 (1.04mm) swap to ESUN SILVER
At layer #17 (1.36mm) swap to ESUN White for the rest.
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
