TP Easter Bunny
Print Profile(2)
Description
Intro
Recycle your toilet paper roll and make a cute easter bunny from it
A cool project for your kids to decorate and hand out to grandma and grandpa.
You can also put a small gift inside.
Print & Assembly
Printing is rather easy with PLA with a small support which is in the print profiles.
There are two print profiles, one for AMS and one mono-colour.
The parts stick quite nicely to a standard ~41mm (German) toilet paper roll (see scale factors for other sizes below)
You can also use glue to hold the parts together.
Bunny Face
If you like the drawing on the photo, feel free to use it:
Scaling / Different TP sizes
If you have different toilet paper roll sizes, please let me know or simply scale the model in Bambu Studio
Here is an overview of TP sizes and scale factors:
| Diameter (mm) | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 |
| Diameter (inch) | 1.38 | 1.42 | 1.46 | 1.5 | 1.54 | 1.57 | 1.61 | 1.65 | 1.69 | 1.73 | 1.77 | 1.81 |
| Scale Factor | 85% | 88% | 90% | 93% | 95% | 98% | 100% | 102% | 105% | 107% | 110% | 112% |
Boost Me (for free)
If you enjoy this model - support me with a free boost. Thanks
License
Comment & Rating (0)