Gap test fish

1. This is a 3mf file for testing the accuracy of the gap, which contains 4 kinds of movable structures that are often used in my design.
2. Try printing this file before printing my other works to adjust the gcode settings. When confirming that all 4 parts can be rotated, print my other works with the same settings, which can increase the printing success rate.
3. Try controlling the gap of movable parts by adjusting the flow rate.
4. If the flow rate drops below 90 and the result still fails, it may be due to the adjustment problem of the machine itself.
5. Whether it can be turned or not, it can be used as a key ring, do not waste materials.

1. This is a 3mf file for testing the gap accuracy, containing 4 types of movable structures commonly used in my designs.
2. Before printing my other works, try printing this file to adjust the gcode settings. Once you confirm that all 4 parts can be rotated, print my other works with the same settings, which can increase the printing success rate.
3. Control the gap between movable parts by adjusting the flow rate.
4. If the flow rate drops below 90 and the printing still fails, it may be a problem with the machine's calibration.
5. Regardless of whether it can be rotated, it can be used as a keychain, do not waste the material.