What is this filament? its pretty nice looking!

FF3D.Makes

Thanks!  I believe that was Hatchbox Terracotta, which I've found prints very well on the P1S using the "Generic PLA" settings in Bambu Studio.

squinn

shawes

Best print started from work yet. Fuzzy skin is great on this design. 

jwilliford

Ghost Booh Fuzzy Skin

Never thought of Fuzzy, great idea. Oh, and the bling is cool too.

dianarayne

Quite a lot of stringing around the eyes, but it might be my old PLA.
The layers are quite visible on the top, which is normal.

Scrabble

BACK SEAM, 1 HR, 0.28mm layer, 2 walls, 5% infill

Looks good! Stinging is definitely just from the filament. the layer lines are visible cause this is .28 layer for quick printing 🙃

WE3D Models

Ha, I didn't even notice the layer height (it was in the profile title) 🤦.

Happens to the best of us 😉 Happy printing!

worked great and super fast. didn't have to edit anything at all - did it 100% from the app and couldn't be happier. I'm printing out a ton to decorate 

machina99

1 Hour Print - 2 walls, 20% infill

Duncaroo

Beautiful and fast! I love the Handy app, it's so easy to print more than one. 

Pappaprintar

⭐𝐅𝐚𝐬𝐭 ‣ [PLA] 0.25mm

Thanks for reviewing, I appreciate the feedback

AneoPsy

My wife loves these ghosts 👻! Made a few sizes by using the scaling tool in the Bambu Studios program. 

O4kl4nd

Judy.Lois

0.2 easy print

BODY3D

Not bad at all for a 30 minute print. Needed to get rid of some Glow In the Dark PLA I've had for a while and I'm definitely adding this print and profile to my collection.

Uranio3D

A Ghost every 30 minutes

nikkelaj

The print quality was fantastic.  I even enlarged it and that looks good too.

audionut21

Optimized (Quality) - 0.2 (VLH - Variable Layer Height)

cover

hfgdjgfhdjj-00;00;00;00[19].jpg

hfgdjgfhdjj-00;00;00;00[18].jpg

hfgdjgfhdjj-00;00;00;00[20].jpg

hfgdjgfhdjj-00;00;00;00[17].webp

hfgdjgfhdjj-00;00;00;00[19].webp

hfgdjgfhdjj-00;00;00;00[18].webp

hfgdjgfhdjj-00;00;00;00[20].webp

plate_1.webp

plate_1.png

0.2 mm / layer2 Walls15 % InfillNO SUPPORTS1 Color ( White )

IMG_1640.webp

Bean Overlord

Variable layer height was used to optimize the surface printing accuracy of the model without significantly increasing the overall print time. The printing speed and related acceleration of the outer walls were reduced. It is recommended to use white Bambu PLA Basic for printing to achieve better model performance.

Variable layer height was used, and the printing speed was adjusted.

20230921_151637.webp

Same as the original “easy print” profile, but with the seam moved to the back so that the front prints perfectly smooth.

0.2 easy print with seam moved to back

IMG_3141 copy.webp

Mitzzyy

Prints came out great. Printed off multiple at different scales because our twins wanted there to be a family of ghosts. haha&nbsp;Printed with pretty standard print settings.15% infillNo Supports0.2mm layer2 Walls

Ghost Family - Basic Print - 0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

.28 layer for fast printingSEAM AT BACK because all the others put it at the front.

PXL_20230925_225145782.webp

App - More Copies v1.webp

kvnper

<ul><li>Balanced profile optimized for print quality</li><li>Reliable First Layer - Print setting tweaks to make the first layer extra reliable</li><li>Various Quality Tweaks - Print setting tweaks for visual quality</li><li>Back Aligned Seam - Seam aligned to the back for a clean look</li><li>Durable - Extra durability for only a tiny amount more print time</li><li>Smooth Adaptive Layers - Very smooth transitions between high and low layer height</li></ul>&nbsp;<ul><li>Arachne wall engine</li><li>0.4 nozzle</li><li>0.1-0.2 layer (adaptive)</li></ul>

booh1.webp

booh2.webp

TBone_427120

Uses variable layer height to smooth out critical areas without increasing print time. If using a tea light, increasing to 3 walls might be necessary for less opaque filaments. Matte filaments diffuse light when internally lit, while smooth filaments will look best in the daylight.

2 walls, Variable layer height, 

Screenshot 2023-09-23 at 1.25.19 pm.webp

arnel.c

Overture Glow in the dark - Green (calibrated flow to 1.02, k= 0.28)Baseline of 0.2mm then used adaptive layerWall = 3; 100% infill (no significant difference in print time)No support, brim default

Adaptive Layer, 3 walls, 100% infill, Overture Glow in the Dark Green

20231016_221112.webp

Ghost_Boo_small layers.webp

Officina23

variable layer height and 50% scaling to print a ghost in less than 30 minutes!

photo_2023-10-26 20.35.58.webp

spary3d

Zenit3D

Vozfrank

0,12 finescale 80%X1C

0.12mm layer, 2 walls, 15% infill

bradmcgonigle

250% scaled up version of the original.

<ul><li>0,12 fine</li><li>P1P</li><li>Scale 80%</li></ul>&nbsp;

MKR.3D

Same as original model but scaled at 150mm height

0.2mm layer, 4 walls, 15% infill

jguzman529

No special settings.<ul><li>0.20 Standard @BBL P1P</li><li>No Supports</li><li>Bambu PLA Basic white</li></ul>

0f8085f9-d305-4ac0-be88-0b94f5033599.webp

bambu-studio_nkysHAgKRG.webp

bambu-studio_cX5DW7j7qX.webp

frommy

Perfect for PETG, Sturdy enough for Outdoor placement. Very Solid 15 Hours Print Time in PETG. Strong Tree Support for better overhangs with PETG. Seam is on the Back.

230% Size perfect for PETG, 0.2mm, Tree Supports, 15% Gyroid Infill

20230818_171102.webp

Printed in Glow-in-the-dark Sunlu filament

Quick print also for fluorescent filament

TragicEraser

Ghost x 6 0.2mm layer, 2 walls, 15% infill

Kamte-

0.2mm layer, 3 walls, 0% infill - added raft for better adhesion

IMG_0522.webp

Pyjamas

PETG0.16mm layer heightAdaptive layersSeam at back150% scaledGyroid infill8hr 48min print time

PETG 0.16mm layer, 2 walls, 15% gyroid infill, 150% scaled, seam at back

Kinetic

0.12 layer height,2 walls with gyroid infill,Z-seam set to back,no brim,Printing speed slowed down

0.12mm layer, 2 walls, 15% gyroid infill, seam on back

jdbaluch

0.12mm layer, Adaptive Layer Height, 3 walls, 10% gyroid infill, seam on back

Scubapauly

IMG_9766.webp

SpectreGadget

Scaled up to 193.46%. 213g filament in Inland PLA+

Marc Tew

5x Multiple Print - 0.2mm layer, 2 walls, 15% infill

TechieNI

For this, it was printed almost the full size of the X1C bed. Printed in sport mode from the start. Great little print form the designer and my son loved it.

0.2mm layer, 3 walls, 15% infill

IMG_20231024_084007.webp

KF Designs

20240131_230050_7ab23b52-87b1-4f3f-b4aa-74f0a0c8eaaf.webp

20240131_230058_fbf40381-079e-44a8-a997-3eaf86a794df.webp

20240131_230055_fb2a748d-832c-474f-b31c-dd634cb8650c.webp

andrewmalaty8

Voronoi version!

微信图片_20240504123000_c91e3adf-619e-42ab-b799-b45819c70f20.webp

wakuwaku

Juste a cute Ghost !Print it without supports =)&nbsp;Video : <a href="https://www.tiktok.com/@body3d_/video/7151361561372691717" rel="nofollow">https://www.tiktok.com/@body3d_/video/7151361561372691717</a>

Print Profile(31)

Description

Comment & Rating (1018)

License

Related Models

Big Ghost Lamp LED kit

Cloth Car (Mini Cooper)

GHOST KEYCHAIN

Ghost