[3DP RNS] Headless_V1.0

Copyright Claim

[3DP RNS] Headless_V1.0

Boost
1257
2055
693

Print Profile(8)

All
P1P
P1S
X1
X1 Carbon
X1E
A1
A1 mini
Voron 0.1

[3DP RNS] Headless_V1.0 / 0.2mm layer, 2 walls, 15% infill
[3DP RNS] Headless_V1.0 / 0.2mm layer, 2 walls, 15% infill
Designer
5.9 h
1 plate
4.7(199)

0.2mm layer, 2 walls, Gyroid 10% infill
0.2mm layer, 2 walls, Gyroid 10% infill
6.1 h
1 plate
4.7(54)

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
1.9 h
1 plate
4.6(68)

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
2.1 h
1 plate
4.2(6)
Click to see more

Open in Bambu Studio
Boost
1257
2055
693
116
3.8 k
2 k
Released

Description

[3DP RNS] Headless V1.0 (3D Printed Robot)

  • Series : 4 Legs / Animaloid Type [Youtube Video]
  • This Is an all at once print. Assembly not required :)
  • If you subscribe to the YouTube channel [3DP RNS], ★ a new robot will be revealed.
  • Thank you for your subscribing! It means a lot to me :)
  • Commercial License [Patreon]

 

※ Notice
For my uploaded robot model to enable all joints to move, it's advisable to use a Brim. 
If removing Brim is inconvenient or challenging, I don't recommend printing it. 
Also, joint functionality may vary depending on the printer and filament you use.
I hope your print is successful and you can have a robot with well-functioning joints.

ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

[3DP RNS] Cubrick & Cube Case V1.0 (3D Printed Robot)

ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

[3DP RNS] Optronic V1.0 (3D Printed Robot)

  • [3DP RNS] Optronic V1.0 Download [Patreon]
  • Optronic V1.0 can be obtained through Patreon (Hero) membership.
  • This robot is equipped with a camera on the front of its head, which has various features such as infrared and thermal imaging.

Comment & Rating (693)

Please fill in your opinion
(0/5000)

The next robot in preparation! :) But I want more subscribers ;)
The designer has replied
8
Reply
It looks like a spider!
Show original
0
Reply
Replying to @gerlaster :
Shh! This is a secret! Hahaha.
Show original
1
Reply
Print Profile
[3DP RNS] Headless_V1.0 / 0.2mm layer, 2 walls, 15% infill
I do not recommend Inland filament. Does not work very well. Used Inland dual color matte for Headless. Did not work very well for Headless and 200% size Worker.
(Edited)
The designer has replied
3
Reply
OMG.. Nice photos! It looks really cool. Thanks for printing
3
Reply
Replying to @3DPRNS :
7t
0
Reply
Print Profile
[3DP RNS] Headless_V1.0 / 0.2mm layer, 2 walls, 15% infill
nice model!
The designer has replied
1
Reply
Thank you for the photo, comment, and print! You printed without a Brim, so I hope the joints didn't detach. If you encounter joint issues, try setting a Brim and reprinting. If you haven't subscribed to my YouTube channel yet, please subscribe. Come check out my Patreon as well :)
1
Reply
Replying to @3DPRNS :
of course!
1
Reply
es lo mejor de bambú handi 😃😃😃😃😄😃😃😃😃😃😃😃😃😃😃😃😃😃😃😃😄😃😃😃😃😃😃😃😄😃😄😄😄😄😄😄😄😃😃😃😃😃😃😃😃😃😃😃😃😃😃😄😃😄😄😄😃😄😃😃😄😄😄😄😄😄😄😄😄😄🥹
0
Reply
Print Profile
[3DP RNS] Headless_V1.0 / 0.2mm layer, 2 walls, 15% infill
great gift for kids
The designer has replied
1
Reply
Your robot's print looks perfect. Is there an issue with the last joint of the robot's leg? Please check it once. Thank you for the photo, comment, and print! If you haven't subscribed to my YouTube channel yet, please subscribe. Come check out my Patreon as well :)
0
Reply
Replying to @3DPRNS :
No issue! Simply how my kids prefer to play with it.
0
Reply
Print Profile
[3DP RNS] Headless_V1.0 / 0.2mm layer, 2 walls, 15% infill
these r awesome. thx for sharing
The designer has replied
1
Reply
It looks like the printing went well. I'm curious if there were any issues with the functionality. Thanks for the photo, comment, and printing! If you haven't subscribed to my YouTube channel yet, please subscribe and become my hero. I will provide robots for the hero :)
0
Reply
Replying to @3DPRNS :
my nephew loves it. some of the brim was hard to fully remove but no big deal. the only thing i can think of is: will the joints become looser over time and it cant hold itself up anymore? but so far so good. yr a great designer!
0
Reply
Print Profile
[3DP RNS] Headless_V1.0 / 0.2mm layer, 2 walls, 15% infill
My first print-in-place print. Really great model.
The designer has replied
1
Reply
You used red and orange accent colors on the white body! It looks really cool. Well done! The robot's joints also seem to be problem-free. Thanks for the picture, comment, and printing! If you haven't subscribed to my YouTube channel yet, please subscribe and become my hero. I will provide robots for the hero :)
1
Reply
Replying to @3DPRNS :
I will definitely check it out!
0
Reply
The joints on this model are a little looser than this designer's other models, but they still work fine.
The designer has replied
1
Reply
Is there a problem with the printing? The last leg of the robot didn't unfold. Please try unfolding it further :)
0
Reply
Replying to @3DPRNS :
No problems at all! I just forgot to unfold it for the photo. Oops!
0
Reply
Print Profile
[3DP RNS] Headless_V1.0 / 0.2mm layer, 2 walls, 15% infill
almost everything top…easy to print, adjustrd the Brim…thank you
(Edited)
The designer has replied
2
Reply
Thank you for printing! All the robots have been printed! The point color on the black body looks cool. Have a nice day! As the number of YouTube subscribers grows, new robots will be revealed. Don't forget to subscribe to my YouTube :)
0
Reply
Print Profile
0.2mm layer, 2 walls, Gyroid 10% infill
This is the coolest model I've printed in a long time.
2
Reply
Thank you for printing and comment with picture! good color!
0
Reply
came out great, the robot was a succes with my kids this time I printed 2, 1 for me lol
The designer has replied
2
Reply
Thank you for comment and printing! Both the worker and the Headless have been printed in cool colors.
1
Reply