Hueforge Skull.
There are 2 different sizes. The smaller one has a print profile. The larger one is in the raw files as it was too complex for makerworld to upload to a print profile.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 2
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA+ Sunlu White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #32 (2.64mm) swap to Grey
At layer #40 (3.28mm) swap to Ash Gray
At layer #49 (4mm) swap to White for the rest.