Phone Stand (No AMS needed)

Copyright Claim

Phone Stand (No AMS needed)

Boost
1132
1674
802

Print Profile(10)

All
P1S
P1P
X1
X1 Carbon
X1E
A1
A1 mini

0.2mm layer, 2 walls, 8% infill
0.2mm layer, 2 walls, 8% infill
Designer
1.4 h
2 plates
4.9(506)

Merged Accent Version for AMS
Merged Accent Version for AMS
Designer
1.9 h
1 plate
4.9(56)

Accent Profile with two more tolerance options
Accent Profile with two more tolerance options
Designer
28 min
2 plates
4.9(42)

Brim,0.2mm layer, 2 walls, 8% infill
Brim,0.2mm layer, 2 walls, 8% infill
1.6 h
2 plates
4.8(61)
Click to see more

Boost
1132
1674
802
38
6.3 k
8.4 k
Released

Description

 01/03/2024 Added a merged accent version for AMS printing

 

Added an accent profile with two more options for people who are having issues with fitting them to holder.

 

The stand is designed to hold the phone with or without a case. Accents on the side are printed separately and fitted in after being printed

 

No AMS is needed for dual-color print.

 

Accents are a tight fit so position them into place and push down on a hard flat surface for a flush fit.

 

Inspired by @libb_s - you should check out some of their models

 

 

If you like this design I now have a MagSafe version and an Apple Watch Stand uploaded to Maker World

https://makerworld.com/en/models/132925#profileId-144122

 

 

https://makerworld.com/en/models/137254#profileId-149348

 

Comment & Rating (802)

Please fill in your opinion
(0/5000)

Print Profile
0.2mm layer, 2 walls, 8% infill
the colors caught my eye, so i gave it a go, printed in white Ziro matte PLA at sport speeds and used a red matte PLA for the accents, they are a tight fit but thats in a good way, looks great and works great too. only suggestion would be to mirror 1 piece on the second plate so you can get the same top or bottom surfaces facing outwards when its all assembled.
(Edited)
The designer has replied
7
Reply
looks good, sorry I thought I had mirrored the accents. will change my profile
0
Reply
Profile changed to have mirrored accents
(Edited)
3
Reply
Nice choice of color
0
Reply
Great job !!!
The designer has replied
3
Reply
Love the red and the yellow versions
1
Reply
Print Profile
0.2mm layer, 2 walls, 8% infill
Sehr schönes Modell und perfektes Druckprofil und Druckergebnis. Habe nichts abgeändert. Das kleine (bei mir weiße) Profile muss mit bisschen Kraft und Gefühl in die Halterung gedrückt werden. passt hervorragend und kann nicht rauslassen.
3
Reply
Print Profile
Print Sequence Sliced by Object - 0.2mm layer, 2 walls, 8% infill
very nice.
3
Reply
Print Profile
0.2mm layer, 2 walls, 8% infill
This Design is a true piece of art - i adore it! ❤️
The designer has replied
2
Reply
Thank you! That means a lot.
0
Reply
Print Profile
0.2mm layer, 2 walls, 8% infill
printed well and i love the design. but i am going to have to reprint it. the brim on the color piece didn't remove at all and even with clean up, it looks junky now. here is hoping printing without a brim works or maybe change the distance or use support filament, if it works for that. Edit: from 4 to 5 stars. pro tip, print inserts without brim.
(Edited)
The designer has replied
0
Reply
it actually prints fine without a brim, I added one because more people would have issues without it. Try printing without but if you have and X1 or P1S make sure you turn the aux fan completely off
0
Reply
Replying to @Reckit :
thanks. printed a couple of colors on the A1. No issues.
0
Reply
super nice model, thank you!
1
Reply
Print Profile
0.2mm layer, 2 walls, 8% infill
top
1
Reply
Print Profile
0.2mm layer, 2 walls, 8% infill
perfect
1
Reply
Print Profile
0.2mm layer, 2 walls, 8% infill
I love it! exactly what I needed!
1
Reply