Insert Remover - Honeycomb Wall (HSW) Remixed by Jodameister

Remixed by

Jodameister

Hobby & DIY>Other Hobby & DIY

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

21 min

1 plate

4.8(66)

0.2mm layer, 2 walls, 15% infill

22 min

1 plate

5.0(9)

0.6mm nozzle, 0.2mm layer, 2 walls, 100% infill

39 min

1 plate

Open in Bambu Studio

Boost

143

439

590

487

Released

Description

When the Inserts fits tight in the Honeycomb Wall, they are difficult to remove for replacing to another location. I tried with a screwdriver, but the PLA gets deformed.

So I designed a removal tool. Stick the tool in the inner hex from the insert and press the hooks on both sides until they click in. Now lever the tool up and down and pull the insert out.
When the insert is removed, you kann push the tool trough the insert.

Print-Settings:

PLA
0.2mm
Shells 4
Infill 50%
Support: Yes, Bed only

STEP-File is provided. Fill free to remix it.

If you print the tool and find it helpfull, please hit Like and rate it. Thank you!

honey comb wall

hsw

insert

Comment & Rating (81)

@Belv4203D

Print Profile

0.2mm layer, 2 walls, 15% infill

Works pretty well 👍🏼

@Rusty_Leo

Print Profile

0.2mm layer, 2 walls, 15% infill

Great print

@user_3892875839

Boosted

This thing is great. The insert popped out quick and easy. Thanks

@fandango2787

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Prints and works perfectlly! Definitelly make a huge difference when removing the inserts! Thank you for sharing it!

@Soppen

Print Profile

0.2mm layer, 2 walls, 15% infill

kinda hard to use but much better than nothing👍

@user_736206690

Print Profile

0.2mm layer, 2 walls, 15% infill

Works

@lukaspabs

Print Profile

0.2mm layer, 2 walls, 15% infill

macht genau das was er machen soll super Druck.

@gronoam

Print Profile

0.2mm layer, 2 walls, 15% infill

printed from pla and it worked very good on my HWS bambu lab x1

@Woogie

Printed fine, but does not work well for my tight fitting inserts. It manages to slip out if using enough force. I was thinking if there was a way to lock the tabs in place, this could solve the issue. I will try to design something, and let you know if it works out. Edit: It worked out :) https://makerworld.com/en/models/186730#profileId-205617

(Edited)