Filament Spool Shelf System Customizable! No Hardware Needed MB Micro by MikeGTP

MikeGTP

3D Printer>3D Printer Accessories

Print Profile(3)

All

P1P

P1S

X1 Carbon

X1E

0.2mm layer, 6 walls, 20% infill

Designer

5.6 h

4 plates

4.9(87)

V2 - 0.2mm layer, 6 walls, 20% infill

4.3 h

2 plates

4.8(31)

Shelving Posts (Bulk Print - 16 pieces with Brim)

4.5 h

1 plate

5.0(2)

Open in Bambu Studio

Boost

509

979

192

1.4 k

4 k

Released

Description

I designed this little shelving system to hold rolls of filament.

No Hardware Required! All 3d Printed Parts!

**UPDATE 1/07/24! I added a Stability & Connection Package! It allows you to add stability and connect multiple towers together

Download it here https://makerworld.com/en/models/128634#profileId-139327

**UPDATE 1/09/24! I added a Tool/Parts Tray that mount directly on top of the shelf system!

Downloaded it here! https://makerworld.com/en/models/131452#profileId-142595

Some people do not have floor space, or maybe they live in an apartment and cannot adhere things to the wall.

This is nice if you have some table space, it would even work on the floor.

It allows you to grab a roll from the middle of your pile without toppling, or having to hold the other rolls.

Each roll has its own shelf.

Not everybody has 150 rolls of filament and needs massive commercial shelving

You can stack them one tower tall, or make as many smaller towers that you want

There are only 4 individual parts.

Easy Assembly!

Start off with 4 FEET
1 SHELF
4 POSTS
1 SHELF
Repeat until you are satisfied with the height, and then you screw on 4 POST TOP CAPS

DO NOT OVERTIGHTEN!!

I printed all of this at .20 Layer Height 20% Gyroid, 6 side walls and 5 top and bottom

ENJOY!

Comment & Rating (192)

@tonsoffun2886

Print Profile

0.2mm layer, 6 walls, 20% infill

made a huge filament tower, and used this for a custom storage rack that fits around my solar generator

@jens.jonsson

First print failed due to the standing up topped over at 82% completion. Is this support to be printed with brims ?

(Edited)

The designer has replied

@MikeGTP

I have not had to use a raft. Try using a 15mm brim and slow down your outer wall speed to maybe 150

@jens.jonsson

Second print failed as well with 1 layer brim at 82% completion

(Edited)

@jens.jonsson

Thirdprint was near success, 2 of the beams started wiggeling near the end so the last 2 layers got messed up. but could even it out by sanding. Can this somehow be printed lying down instead of upright?

@spyderhd

This is a handy little shelf system that I can see possibly growing into something even more. Looking forward to printing some more of these.

The designer has replied

@MikeGTP

That looks great! I am glad it worked out for you. Thank you for printing it and posting pictures!

@Chris788

Print Profile

V2 - 0.2mm layer, 6 walls, 20% infill

great storage and prints perfectly

@mitzgolden23

Print Profile

0.2mm layer, 6 walls, 20% infill

going great so far! adding a layer or two day by day. Do you happen to know what the max height in rolls is?

The designer has replied

@MikeGTP

I have measured my rolls to be 3 in and I would say there is about a quarter inch or maybe slightly more left of room

(Edited)

@mitzgolden23

Replying to @MikeGTP :

appreciate it!

@mitzgolden23

Replying to @MikeGTP :

Hey! So I have successfully printed around 5-6 full layers with zero issues. For some reason now the last two times I tried printing the four posts, it fails around 80%. I'm new to printing so assuming it's something I am doing wrong. Let me know if you have any suggestions thanks.

@3DMakerMax

Print Profile

0.2mm layer, 6 walls, 20% infill

Prints great! I'm using PETG, as I have a lot of it at the moment. Now to make more!

The designer has replied

@MikeGTP

I am glad to hear that it worked out good for you. Thank you for posting a picture as well

@OzPrintPlaygrou

Boosted

Fantastic design, great adaptability, extremely sturdy. Highly recommend!

The designer has replied

@MikeGTP

Awesome to hear. I'm glad you like it. Thanks for posting a picture of your print

@rcornish6591

Great print flawless not one mess up PETG screw pieces ABS shelves and PLA+ tool tray.

The designer has replied

@MikeGTP

That looks great. Thanks for sharing the pictures!

@jonesq

Boosted

Print Profile

V2 - 0.2mm layer, 6 walls, 20% infill

Great print! I looked everywhere for a commercially available vertical spool shelf, but I could not find one. This takes a lot of time to print and a lot of filament, but of course that's no fault of the designer. I finally got what I wanted, which is a vertical spool rack! Possibly the most useful thing I have printed!

@bumpusd

I made the first one and ran out of blue so had to pick up in black. After running the p1p for nearly 24 hours straight and using up nearly a full spool of filament I got the white one done. I successfully used the stacking method to on the shelfs to print 6 of them in one go. I used a .35mm gap between each shelf and they were not exactly easy to separate but I managed it with a putty knife and some grunting. If I were to do it over I would go in and add some tiny cylinders or spheres between the shelfs to make them separate easier. All in all it's a great design and I appreciate the fact that it's all printed and requires no outside hardware. All of the screw parts fit together with no issues. I did use the suggestion of slowing the outer walls to 150 and auto generated outer brims on the risers and they printed with no problem.

(Edited)

The designer has replied

@MikeGTP

Thank you for your in-depth review and including pictures yours came out great. I am glad it worked for you

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Bambu Accessory Box-A1/A1 mini-No Hardware Needed

MingGY

554

1.1 k

Bambu Accessory Box-P1/X1-No Hardware Needed

MingGY

183

691

1.4 k

RameFrame - Default Cover

Rame22

Storage Box-v2-收纳盒v2-No Hardware Needed-无需五金

MingGY