JAYO 650g Bambu Lab AMS Cardboard Spool Adapter Ring

JAYO 650g Bambu Lab AMS Cardboard Spool Adapter Ring

Boost
9
16
4

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

JAYO 650g - 0.2mm layer, 2 walls, 15% infill
JAYO 650g - 0.2mm layer, 2 walls, 15% infill
Designer
45 min
1 plate
4.3(3)

Open in Bambu Studio
Boost
9
16
4
1
32
34
Released

Description

This adapter system wraps the edges of a JAYO 650g 175x59mm cardboard spool in order to:

  • provide smooth rotation within a Bambu Lab AMS
  • prevent carboard debris from depositing within a Bambu Lab AMS

Features:

  • Reusable
  • JAYO nameplate for easy identification when reusing

Instructions:

  • Measure your spool first to ensure it matches the specified dimensions
  • Print this model twice for a single spool
  • Affix one spool ring adapter on each side of the JAYO spool
  • See attached photos

Considerations:

  • Print Material: Please print with a basic PLA or PETG to minimize any shrinkage.
  • Too Tight? Too Loose? Cardboard expands with humidity and contracts when dried. A cardboard spool that has absorbed too much moisture may cause the adapters to fit very tight. Placing the spool in a filament dryer, such as the SUNLU S2, for a bit should resolve this. Note, you should not dry the spool with the adapters attached as they can warp in the heat. Keep in mind that after a long drying session the adapters may fit too loose. This should resolve itself shortly as the cardboard reabsorbs some moisture from the air.
  • AMS Lid Doesn't Close? All of the spool adapters I make are less than the official AMS spool clearance limit of 202mm, as specified on the official AMS product page, and as tested within my own AMS. However, some people have stated their spools are rubbing against the lid with the adapters attached. It's hard to say what's causing this since I cannot reproduce the issue myself, however, I've created an AMS Lid Riser which allows you to keep your AMS lid closed while providing additional clearance for larger filament spools. It's a quick and easy print which you can find on my profile or directly here: https://makerworld.com/en/models/33133

Comment & Rating (4)

Please fill in your opinion
(0/5000)

Print Profile
JAYO 650g - 0.2mm layer, 2 walls, 15% infill
Great model, good print profile! Works perfect, like the other adapters.
The designer has replied
1
Reply
Happy to hear it's working well for you. Thank you for the rating!
0
Reply
Print Profile
JAYO 650g - 0.2mm layer, 2 walls, 15% infill
Other Issues
0
Reply
Print Profile
JAYO 650g - 0.2mm layer, 2 walls, 15% infill
0
Reply
No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.