Stitch Door Sign - editable

Designed so it fits above the door. There is an edge to it rests on the white architrave. Also there spacer that can be used with double sided tape.

Fits standard door trims of 18mm thick.

Steps to edit Text for Sign

Follow the images or use the steps below. note this works at time of posting.

1. Open Bambu Slicer, then click on Objects

2. Right Click on “Text_Shape” and edit text.

3. Edit your text input to the name you want.
4. Click on the Main blue – not text.stl and text_shape as per image (step 4), then right click to see “Fix Model”

5. This will load, sometimes the model doesn’t work and ends with the text under the plate. To fix this go to the next step, step 6.

6. Click on Move and edit the Z axis. By height of option.

7. See were it was -10mm and changed to -8mm.

8. Re-slice and should now work.

Note: to check after preview, set the height to one layer to see if all the image and text starts on first layer .

E&OE