A1 Mini Outrigger Feet
Remixed by
Copyright Claim
A1 Mini Outrigger Feet
Remixed by
Boost
27
68
14
Print Profile(1)
0.2mm layer, 4 walls, 30% infill
Designer
5.8 h
4 plates
Open in Bambu Studio
Boost
27
68
14
5
85
67
Released
Description
Retro outrigger feet Space 1999 Eagle style! Bit of a fidley fit but they get there in the end. Mine are all pla+ but you can use pretty much anything filament as they run in cantilever style using the sides for support. I'm using some old style P1P wobble rubber feet but you can print your own in tpu if you like. Link here…https://makerworld.com/en/models/18809#profileId-17573
You will need to add your own longer m3/m2 screws.
Creds tojohndc for the original make https://makerworld.com/en/models/109008
Enjoy!
Comment & Rating (14)
All
Print Profile
0.2mm layer, 4 walls, 30% infill
Thanks for taking the time to design this. I've had the idea of using the anti vibration feet on the mini but never got around to it. The only downside is that the feet not able to move around much to dampen the vibrations. A simple fix would be to extrude the inner face down a bit so the feet don't sit so deep as shown in the picture.
The designer has replied
1
Reply
Mine were intentionally designed not to wobble, but to just make use of the feet if you had a spare set. Just print some small washer style shims @ the height you need to sit above the feet inside the hole... it's keyed for that reason :) Thanks for using the design and posting :)
0
Reply
Replying to @defyant123
Awesome model, but I ran into similar issues of the feet not properly absorbing enough vibrations, so I whipped up these 7mm high spacers to give this model a tiny bit of height!
They can be found here: https://makerworld.com/en/models/235044#profileId-251359
They will definitely give your feet the little bit of wiggle space they need
(Edited)2
Reply
Print Profile
0.2mm layer, 4 walls, 30% infill
Phenomenal design!! Fits my A1 Mini perfectly, it looks a part of the base build, and it lets me have a use for the extra set of vibration feet that came with my P1S.
10/10
The designer has replied
1
Reply
Love the darker colour!
0
Reply
Print Profile
0.2mm layer, 4 walls, 30% infill
1
Reply
Print Profile
0.2mm layer, 4 walls, 30% infill
1
Reply
Boosted
Print Profile
0.2mm layer, 4 walls, 30% infill
0
Reply
Boosted
Print Profile
0.2mm layer, 4 walls, 30% infill
0
Reply
Print Profile
0.2mm layer, 4 walls, 30% infill
0
Reply
Print Profile
0.2mm layer, 4 walls, 30% infill
0
Reply
Print Profile
0.2mm layer, 4 walls, 30% infill
0
Reply
Print Profile
0.2mm layer, 4 walls, 30% infill
Support Issue:fehler beim Support
Strength Issue:passt nicht
0
Reply
Related Models
© 2024 MakerWorld