A girl face on the front of the extruder that rolls one eye while printing.
This face can be customized by you by coloring the objects you want. There are 4 of my suggestions in the print profiles.
You can decide what you will print in what color.
After opening the project in Bambu Studio, go to the objects menu and set the colors you want.
Let me know if the print was successful and if everything fits. If any corrections need to be made, let me know.
If you have printed it, please leave a rating.
Before installation, the original front and the rotating element must be dismantled.
During installation, the eye should be pressed as far as it will go. After putting the face, the eye should be flush with the face or deeper.
When assembling, make sure that the top latches are flush with the top edge before pressing from the front.
If you think that standard hooks are too weak and may break, print a version with reinforced fasteners.
You will see details in the photos below.
Assembly instructions below.