If you build the awesome Vision enclosure from @humebeam, you need sometimes to store the top and/or the front door for some prints.

Now you can put them into this tiny wallmount to have them somewhere secure.

Main parts are for the 3mm panels, I also added a version for 4mm panels.

The screwhead should not be higher as 1.5mm.

The lower parts are enough, but I added some top parts top hold them not wobbeling around. The top will hold the screws from the handle if they are from a metal which is magnetic. Then I added one middle part for the door which fits to the magnets in the door to hold the door.

You need for this holders

• 4 Magnets 6x3mm

I recommend print them with 4 walls and a 20% stable Infill like gyroid.

For the easy remove of the door I uses the half hinge and my pin for the hinge to remove it easyly.

To mount this, take one of mounts, and mount this one horizontally levelled. Put top and door in it, arrange it and mount the second one.

The hole is for 4mm or 4.5mm screws.

If you have any additions ot requests, like bigger screws or another thickness of the panels, let me know.