Im currently upgrading most of my suspended models to include channel to install led strips in them..
So for the suspended star destroyer V2.. since its already in 2 parts.. i added a channel path so you can install a LED strips around the outer frame.. and i put small holes in the inner frame so that the lights from the LED shines through to the ship..
If you're interested in getting the LED strips.. here's my affiliate link to buy it..
5V USB RGB LED Strip Light https://s.click.aliexpress.com/e/_oEk0hDa
The ship itself is modelled by nikoli2803 from thingerverse.. the circular frame is the imperial logo itself.. the whole frame i modelled it to look like the deathstar.. everything was done using Tinkercad..
The ship itself comes in 2 parts.. front and back.. and there are 3 clips to hold both side of the ship together.. the bottom clip will be the stand for the whole suspended star destroyer and the 2 clips works on any side..
Its a bit tricky to assemble since you cant put both parts of the ship down since its suspended on the strings..
When printing suspended models.. one important thing to remember is to set the wall generator to arachne from classic.. this will make the slicer print the strings..
I hope you guys have fun printing this new version of the suspended imperial star destroyer..