Ink Dragon Lightforge
Print Profile(1)
Description
Lightforge uses a thin layer of white instead of the standard black found in most Hueforge, allowing light to shine through.
Colors will appear deeper and darker when illuminated.
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Beige Transmission Distance: 8
PLA Hatchbox Purple Transmission Distance: 2.6
PLA Hatchbox Pink Transmission Distance: 12
This print uses 3 unique filaments
Swap Instructions:
Start with Beige
At layer #9 (0.8mm) swap to Purple
At layer #12 (1.04mm) swap to Pink
At layer #18 (1.52mm) swap to Purple
At layer #20 (1.68mm) swap to Pink
At layer #23 (1.92mm) swap to Beige for the rest.
Membership
Turn these designs into something you can share! Commercial Members are welcome to sell physical prints of JC Unboxed creations. Your support helps me keep designing new artwork, useful prints, games, and strange little characters like Monty, Henry & friends. Thanks for opening the box!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)