Textured Faces Series :
Stoned : https://makerworld.com/en/models/45876#profileId-47671
Sliced : https://makerworld.com/en/models/93257#profileId-99667
Stoned Again : https://makerworld.com/en/models/116838#profileId-125606
This model has been carefully designed to look great with 4 colors.
Only filament swaps! No AMS necessary.
This does not need an AMS to print, but it does make it easier.
If you have an AMS, print directly from the provided print profile.
If you don't have an AMS, open and slice in the Bambu Studio app and add pauses at the provided layer heights for filament swaps.
When scaling the model, scale in the X and Y direction only. Leave Z at 100%.
Print at 100% infill with a layer height of 0.06mm with a base layer of 0.24mm
Swap Instructions:
Start with Black
At layer #8 (0.66mm) swap to Dark Gray / Meta Gray
At layer #14 (1.02mm) swap to PolyTerra Gray / Matte Gray
At layer #18 (1.26mm) swap to White for the rest.