Magic puzzle box by cadex1

cadex1

Toys & Games>Puzzles

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 3 walls, 10% infill

3.9 h

1 plate

3.5(10)

Boost

235

Released

Description

Secret Box: You can keep small things that you don't want to be easily seen by others .
peel off the ball which is printed in place .

Comment & Rating (13)

@moonrakerone

What does the ball do? It separated fine, but it won't close with it in place, or it fully sinks into other side. Ah it's because I printed it smaller than intended so the tolerances likely stopped working. I'll need to retry at full scale.

(Edited)

The designer has replied

@cadex1

the ball serves to keep it closed if it is in a certain position or open it if it is completely sunk https://www.instagram.com/p/CqqqGp1s9Gp/?igsh=NHNnbmViM2g4bzU5

@dylcro2

Print Profile

0.16mm layer, 3 walls, 10% infill

stiff, ball didnt come out, cut my finger trying to pull it apart with the sharp corners

(Edited)

@realdawnerd

Same, cut myself too. Those corners are really sharp :\

@RaddMann

Print Profile

0.16mm layer, 3 walls, 10% infill

Too tight. Gets stuck.

@TKB3D

Print Profile

0.16mm layer, 3 walls, 10% infill

tolerance did not work

@haggen29

Print Profile

0.16mm layer, 3 walls, 10% infill

what ball is to be used

@Cire4492

Print Profile

0.16mm layer, 3 walls, 10% infill

did okay

@TanjaH

Print Profile

0.16mm layer, 3 walls, 10% infill

An sich ist alles prima aber die Teile haben wirklich verdammt spitze Ecken

@lockum1

Print Profile

0.16mm layer, 3 walls, 10% infill

Other Issues:well it needs instruction on how to assemble. Both my wife and myself both tried to assemble it and no could not do it. as for sharp edges they are corners as such corners will be sharp so don't stick yourself as with any corner.