Pre-sliced profiles are available for single-colour, multi-colour AMS, and braille puzzle cubes.
All parts can be found in the pre-sliced print profiles.
Part name | Quantity | Image |
Core | 1 | ![]() |
Centre | 6 | ![]() |
Edge | 12 | ![]() |
Corner | 8 | ![]() |
Washer | 6 | ![]() |
Caps (optional) | 36 | ![]() |
In addition to the 3D printed parts above, you'll also need the following screws, springs, and nuts. They're available to purchase from Maker's Supply on the Bambu Lab store, however similar sizes from other retailers might also work.
Part name | Quantity | Note |
M3x20 Screw
| 6 | Larger/smaller screws may be needed if you've customised your cube to be a different size. |
0.5x7x12mm Compression Spring | 6 | Similar sizes might also work. I've tested a ¼"x13/32" compression spring with no issues. |
M3 Hex Nut | 6 | - |
1: 3D print the parts above and gather the required non-3D printable parts.
| ![]() |
2: Insert 6 Nuts into the Core.
Hint: Use a hex key to position/align them correctly.
| ![]() |
3: Insert a Screw through a Washer, then through a Spring, then through a Centre piece.
Then screw it into the Core.
| ![]() ![]() |
4: Repeat this 3 more times to form a circle around the Core. | ![]() |
5: Complete the circle by placing 4 Edge pieces between the Centre pieces.
| ![]() |
6: Hold the cube on its side, then place 4 Corner pieces into the top of the cube.
| ![]() |
7: Then, place 4 Edge pieces between the 4 Corner pieces.
| ![]() |
8: Screw a Centre piece into the middle.
Remember to use a Washer and Spring.
| ![]() |
9: Repeat steps 6-7 for the other side.
| ![]() |
10: When all Centre pieces are screwed into place, all pieces should be locked into place.
If the cube does not rotate smoothly, try loosening some of the screws.
| ![]() |
11: Superglue the caps onto the outside of the cube (optional). | ![]() |
12: Try to solve your puzzle cube! | ![]() |
Customisable files are provided for the puzzle cube and custom caps.
Click the customise button to design your own 3x3 puzzle cube with custom emoji or letters.
Leave a comment if you run into any issues - I'll try my best to help.
Custom caps can be generated with braille, emoji, or letters.
You can also customise text size, text height, the dimensions of the cap, and whether to include a hole for the centre screws.
When you finish customising, simply export all 6 custom caps, and 3D print each of them 6 times (36 caps total).
The caps are designed to be superglued onto the puzzle cube.
License
Please view the .scad files for full license details. Please ensure that you comply with the respective licenses when using or modifying this code. |
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.