Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Gray Transmission Distance: 2.5
PLA FLUO GEETECH yellow Transmission Distance: 2
PLA White Transmission Distance: 6

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Gray
At layer #13 (1.12mm) swap to yellow fluo
At layer #15 (1.28mm) swap to White for the rest.

Obviously if someone likes to make it in any other color, just replace the yellow color with any other color.

you can resize it to your liking but leaving the Z height unchanged.