Designed for the PARKSIDE® PFBS 160 B2 dremel. But I believe it will work for other models as well.
Recommended settings
Material: PET-G
Layer height: 0.2
Perimeters: 4 or more
Infill: 20%
Infill Type: Cubic (or something similarly strong)
Supports: No
Note: Because of the weight of the tool, I made hexagons with a Relatively tight fit. When putting on and taking off from the empty inserts, you need to be careful and use a little force.
Created from the scratch, but heavily inspired by the Rapalax's work.
HSW Dremel holder od autora Rapalax | Stáhněte si zdarma STL model | Printables.com