Hueforge Owl
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x142.86mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA Overture Black Transmission Distance: 0.1
PLA Esun epla matte milky white Transmission Distance: 2.6
PLA Eryone Agate Grey Transmission Distance: 1.2
PLA Eryone Signal grey Transmission Distance: 2.9
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to epla matte milky white
At layer #17 (1.44mm) swap to Agate Grey
At layer #19 (1.6mm) swap to Signal grey
At layer #20 (1.68mm) swap to epla matte milky white for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)