Here is BB8 in drip style, have fun with it and follow the instructions so that the result is the same!

If you are missing a shelf to put the picture or the other Hueforge pictures on the wall, take a look at my HueShelf ;)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA Black Transmission Distance: 0.3
PLA Gray Transmission Distance: 2.5
PLA Orange Transmission Distance: 3
PLA White Transmission Distance: 6

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:

Start with Black
At layer #7 (0.64mm) swap to Gray
At layer #14 (1.2mm) swap to Orange
At layer #20 (1.68mm) swap to White for the rest.