Box For Stackable Storage Box

Francais :

I sought sturdy boxes to safely store the stackable containers designed by Lucky Resistor. These boxes can be shaken vigorously in any direction without causing the different components to mix.

When the lid is closed, it comes into contact with the tops of the boxes inside.
This is expected, as I desired a snug fit. Simply push the lid slightly towards you to fully close it.

This grid is designed to perfectly accommodate LuckyResistor's "Stackable Storage/Assortment Boxes." I utilize both full-height and half-height boxes from this collection, and they are exceptional. I strongly recommend purchasing the complete set.

The grid can accommodate up to a 4x3 configuration. The tallest arrangement is 3X2X2 (utilizing two stackable 1X1 boxes).
Assembly requires six M3X30mm screws.

I advise printing the latch using PETG (it is also compatible with other materials).
The seal is not mandatory, so I did not print it. If desired, use TPU instead.

If you need a different size, feel free to request it in the comments.

Thank you in advance to those who take two minutes to rate or comment.

translated by google translate

Anglais :

I wanted resistant boxes so that I could safely store the stackable boxes created by Lucky Resistor. You can shake the box in all directions without the different elements mixing.

When closing, the lid touches the top of the boxes inside.
It's normal, I wanted an adjustment, just push the cover slightly towards you to lower it completely.

This grid is designed to precisely fit LuckyResistor's "Stackable Storage/Assortment Boxes". I use full height and half height boxes from this collection, and they are excellent. I highly recommend purchasing the complete set.

I advise you to print the latch in PETG (also works in other materials)
I did not print the seal since it is not obligatory, otherwise use TPU

The grid goes up to 4x3. And the highest which is the 3X2X2 (2 stackable 1X1 boxes)
For assembly you will need 6 M3X30mm screws

If you wanted another size, ask me in comments

thank you in advance to the person who will take 2 minutes to rate or comment