Thermometer hygrometer stand by richard.bernards

richard.bernards

Tools>Measure Tools

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

33 min

1 plate

4.7(89)

Stand v2 - 0.2mm layer, 2 walls, 15% infill

Designer

34 min

1 plate

4.8(48)

Hexagon style - 0.2mm layer, 3 walls, 20% infill

31 min

1 plate

4.8(32)

Open in Bambu Studio

Boost

188

190

739

718

Released

Description

!!!! check out the customizable version - click here !!!!

I have made this simple stand for a commonly available, cheap hygro- and temperature-sensor. The stand is angled under 60 degrees and currently serves me well on my desk to show me the room temperature and humidity of my office.

Update 2024-05-28: I have added a remix to this model with a parametric (makerworld customizable) design. You can adjust the angle, thickness, etc. from this site. You can find it here.

Update 2024-02-18: Stand v2 added, which should have a better fit and has cutouts for the lips of the hygrometer.

By the way, the texture on the front of my print is the result of using a textured PEI plate.

What you additionally need:

Sensor, which can be purchased here, or anywhere similar (I think aliexpress carries them as well).

I used the following settings to print in 1.75 PLA with 0.4 nozzle:

layer height	0.2mm
walls	2
top shell layers	2
bottom shell layers	2
infill	15% grid
raft or brim	no
support	not if oriented right way up (hole should be on the bed)

Leave a like, make or remix as you like!

Comment & Rating (190)

@ItsVRK

Print Profile

0.2mm layer, 2 walls, 15% infill

I printed this, and it printed well, but after seeing another comment showing where it had purged onto the A1 wiper I created my own version from scratch that also acts as a poop retainer https://makerworld.com/en/models/438841 (image attached)