Thermometer hygrometer stand by richard.bernards

richard.bernards

Tools>Measure Tools

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

33 min

1 plate

4.6(59)

Stand v2 - 0.2mm layer, 2 walls, 15% infill

Designer

34 min

1 plate

4.8(17)

Hexagon style - 0.2mm layer, 3 walls, 20% infill

31 min

1 plate

4.9(15)

Open in Bambu Studio

Boost

122

106

391

418

Released

Description

!!!! check out the customizable version - click here !!!!

I have made this simple stand for a commonly available, cheap hygro- and temperature-sensor. The stand is angled under 60 degrees and currently serves me well on my desk to show me the room temperature and humidity of my office.

Update 2024-05-28: I have added a remix to this model with a parametric (makerworld customizable) design. You can adjust the angle, thickness, etc. from this site. You can find it here.

Update 2024-02-18: Stand v2 added, which should have a better fit and has cutouts for the lips of the hygrometer.

By the way, the texture on the front of my print is the result of using a textured PEI plate.

What you additionally need:

Sensor, which can be purchased here, or anywhere similar (I think aliexpress carries them as well).

I used the following settings to print in 1.75 PLA with 0.4 nozzle:

layer height	0.2mm
walls	2
top shell layers	2
bottom shell layers	2
infill	15% grid
raft or brim	no
support	not if oriented right way up (hole should be on the bed)

Leave a like, make or remix as you like!

Comment & Rating (106)

@ItsVRK

Print Profile

0.2mm layer, 2 walls, 15% infill

I printed this, and it printed well, but after seeing another comment showing where it had purged onto the A1 wiper I created my own version from scratch that also acts as a poop retainer https://makerworld.com/en/models/438841 (image attached)

The designer has replied

@richard.bernard

@ItsVRK could it be you are commenting on the wrong model/print profile?

(Edited)

@shelby.eleanor

Print Profile

Stand v2 - 0.2mm layer, 2 walls, 15% infill

Very nice! Perfect angle.

(Edited)

The designer has replied

@richard.bernard

@shelby.eleanor if you want to change angle, thickness or something else, I have made it customizable: https://makerworld.com/en/models/476896

(Edited)

@vidguide

Print Profile

Hexagon style - 0.2mm layer, 3 walls, 20% infill

small issue on one side from my filament, not the model.

@udomsak25

Print Profile

0.2mm layer, 2 walls, 15% infill

Very good.

@user_1490572195

Print Profile

Stand v2 - 0.2mm layer, 2 walls, 15% infill

Thx very nice

@King_Budcho

Print Profile

0.2mm layer, 2 walls, 15% infill

very nice 👍🏻 thanks for sharing!

@ItsVRK

Print Profile

Stand v2 - 0.2mm layer, 2 walls, 15% infill

Worked great!

@meisterfischmac

Print Profile

0.2mm layer, 2 walls, 15% infill

Other Issues:I printed three at the same time. Two turned out like the one in the picture and one looked great. I do not know why. It serves its purpose but is a shame.

The designer has replied

@richard.bernard

I don't know exactly what happened for you. I have redrawn the model completely and made a V2 which also has a better fit and cutouts for the lips of the hygrometer. Could you try that one and see whether it renders the same result as before?

@richard.bernard

Replying to @richard.bernard :

@meisterfischmac I have also added a customizable version https://makerworld.com/en/models/476896 , this way you can tinker with the angle and dimensions yourself.