Printer Torture Test by tjhoven74

tjhoven74

3D Printer>Test Models

Print Profile(8)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 2 walls, 10% infill

Designer

1 h

1 plate

4.7(41)

Torture Test that works with the A1 Mini!

Designer

1.4 h

1 plate

4.7(9)

0.2mm Slicer default setting

1.2 h

1 plate

4.8(20)

0.08mm Slicer default setting

2.3 h

1 plate

5.0(4)

Click to see more

Open in Bambu Studio

Boost

104

247

874

640

Released

Description

Summary

If you enjoy my design, please go ahead and like it, as it helps other people find it!

This is my custom 3D printer torture test.
Retraction Test
Bridging Test
Cooling Test
Flow Test

Dimensional Accuracy Test:
Use Calipers to measure the cube, dimensions should be 20 x 20
Holes should fit filament through, as the holes are 1.8 mm in diameter

Surfacing Test
Belt Tension Test
Line Width Test

First Layer - The bottom right has three different layers. Use a calipers to measure the three heights 0.6, 0.4, and 0.2. Take the proposed and the actual height to help you calibrate your Z height.

Overhang Test

The entire model is 100 mm by 50 mm

If you print this, please upload a picture under makes. I would like to see how it works for you.

Thanks!

Comment & Rating (91)

@uran238

Print Profile

0.2mm Slicer default setting

P1S Basic PLA it's crazy what this Printer can do...

@tjhoven74

Wow, your print came out great! Thank you for the upload!

@user_2502918235

With A1 printing, it looks terrible.I don't know. Why is that

The designer has replied

@user_2146564298

me too

@tjhoven74

Replying to @user_2146564298 :

Overall quality looks pretty good. It looks like the only thing that may need to be tweaked is your cooling.

@codemania

Try to adjust the maximum temperature of the nozzle. This may affect printer To be like this sometimes.

@Sami82

Print Profile

0.2mm layer, 2 walls, 10% infill

It would appear I need to do some calibrating on my x1c. I used Bambu PLA Matte filament. I would love to know if there is a link to what section of the test tells you what needs to be fixed.

(Edited)

@spdun2004

Print Profile

0.2mm layer, 2 walls, 10% infill

good print. really puts a printer to the test.

@zeyun

A1 PLA basic a nice test, but a little difficult for A1

@Onkelsam

Great for seeing what overhangs and fine details are possible, the model doesn't have to be beautiful. It just has to show what the printer can do or where you need to adjust it