This is a L3G0 minifigure mount I designed to clip on to the AMS lite filament hub coming out of the A1 and A1 min extruders. This clip has been designed and tested to ensure the L3G0 minifigure does not go flying when you are printing at full speeds. This model prints in 22 minutes with bed leveling, only uses 3g of filament and needs supports to print. I have uploaded a video here that shows the preloaded speed benchy being printed, while the L3G0 minifigure remains fully in place and does not move at all. This game me quite the laugh to put the flash on top and watch him during the speed benchy print. I haven't hooked my AMS lite up yet, so I am unsure if this blocks auto filament changes.
WARNING: By attaching this, the tangle monitoring will be disabled. Use only when you are by the printer, do not leave attached long term.