Bambulab A1 spool holder wall mount by Robbicon

Robbicon

3D Printer>3D Printer Accessories

Print Profile(2)

All

0.2mm layer, 3 walls, 10% infill

Designer

1.2 h

1 plate

4.8(31)

IKEA SKADIS Mount - A1 Spool Arm

1.9 h

1 plate

Open in Bambu Studio

Boost

184

202

Released

Description

I designed a wall mount for the original Bambulab A1 spool holder, you can use it if there ist not enough space on top of your A1 or you don´t want that extra weight on top.

Simply clip your supplied spool holder to the printed wall mount and screw it to the wall. If the supplied PTFE tube is to short for placing the spool holder at the wall, you can simply disconnect one of the four tubes at the ams lite and use it transitionally for the spool holder.

You can also buy a new PTFE tube like this one https://amzn.to/47bYVuz (affiliate link) and cut it to the needed length.

Please let me know if you have suggestions for improvement, happy printing :-)

Comment & Rating (41)

@jiri.mudrunka

Print Profile

0.2mm layer, 3 walls, 10% infill

Print was flawless. Works as intended.

@Schemeinda

Print Profile

0.2mm layer, 3 walls, 10% infill

Printed really great and fits perfectly!

@szedlakjozsef92

Print Profile

0.2mm layer, 3 walls, 10% infill

HODSPOOL!!! Hold The Spool! :)

@jowenx1c

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

great design. thank you

@Dr.Taly

nice

@Rytis1986

Print Profile

0.2mm layer, 3 walls, 10% infill

@gosser96

Hi. Would I be able to remove the spool holder when not in use, leaving the part screwed to the wall hanging? I have the AMS Lite but looking for a way to mount an extra spool when ex occasionally printing TPU - and I need to be able to remove it again due to limited space. This print might look like it could offer that 😊 Thank you.

The designer has replied

@Robbicon

Yes, thats possible. There are two parts which slide together. You can also check my other uploads, there is a combination with desk stand and wall mount.

@gamebae

Hey do you mind if I post a remix for an IKEA SKADIS mount version? Thanks!

The designer has replied

@Robbicon

It’s okay if you post your remix as a print profile on my design, but no remix for uploading as your own design.

@marco.p

Print Profile

0.2mm layer, 3 walls, 10% infill

really good Design..

The designer has replied

@Robbicon

Thank you Marco :-)

@Schacky

Print Profile

0.2mm layer, 3 walls, 10% infill

Funktioniert super. Vielen Dank!

The designer has replied

@Robbicon

Vielen Dank für die 5*, freut mich dass es dir gefällt. Guten Rutsch ✌🏻🎆

(Edited)

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.