Gridfinity hotend modules A1 (mini) by PrecisionCrafts

PrecisionCrafts

3D Printer>3D Printer Accessories

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

1 h

1 plate

4.6(19)

Open in Bambu Studio

Boost

109

154

Released

Description

Improved Version / Version 2 :

https://makerworld.com/en/models/442970#profileId-348979

Just a module for the Gridfinity system by Zack Freedman.

It holds 2 A1 nozzles.

Pretty self-explanatory.

Comment & Rating (26)

@dude_blight89

Print Profile

0.2mm layer, 2 walls, 15% infill

Print came out nice and the hot ends fit well.

@VulpinePrints

Print Profile

0.2mm layer, 2 walls, 15% infill

This was my first PETG print on my A1 and it came out perfect. I've printed quite a few Gridfinity pieces, and this was the easiest, by far. The only moment that worried me whenI heard a crackling sound after the print finished but before I got my notification. I thought the print head was hitting the print. Nope. The print literally just popped off the build plate. I picked the plate up as I do to remove them, and they just slid off the back side. Thanks for a great print that just works and fits perfectly.

@acostaerik23

very nice and snug

@FloatyPiet

print Version 2!!! I didn’t see Verdi 2 before printing. Fits great but if I can’t stick stuff ontop it’s annoying. I’d recommend to drill 4 holes or make a version 3 with holes. and if delete this version so people don’t end up printing this like me :(

@matteoleone

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

thank you

@Jazznow

I can't see it from the perspective of the picture. Will the hotends be deep enough, to stack another box on top?

(Edited)

@acostaerik23

yes it will

@Jazznow

thank you

@ShayneTroxler

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed great but I had to nip off the filament that it leaves sticking out of the hotend entrance for it to fit.

The designer has replied

@PrecisionCrafts

Hey ShayneTroxler, Thank you for your feedback. I just published an updated version. I improved it and also added space for the leftover filament so you do not need to nip it off 😉 You can find it here: https://makerworld.com/en/models/442970#profileId-348979

@user_2059476740

Print Profile

0.2mm layer, 2 walls, 15% infill

New model is great

(Edited)

The designer has replied

@PrecisionCrafts

Hey user_2059476740, Thank you for your Feedback. I just uploaded an updated version that should fix this problem. If you want to try it out, you can find it right here: https://makerworld.com/en/models/442970#profileId-348979